Sold

SCMI MB29 Line Boring Machine

SCMI MB29 Line Boring Machine Description: Drills horizontally and vertically, 32 mm, 29-Spindle boring head, tilting head, drills vertically from bottom & horizontally from rear, 4 HP – 2,800 RPM ...

Homag DRILLTEQ200

HOMAG DRILLTEQ D200/Model 3 (2019): Excellent - Like New Condition! 2019 ● Barcode option ● Servo controlled X, Y, Z ● 3 Spindles, independently controlled ● 8x30 or 8x35 dowels ● Low-pressure glue...

Biesse NK Case Clamp

Biesse Cosmo NK Case Clamp - Excellent condition! Specs: COMIL COSMO NK CASE CLAMP Heavy Rigid Construction Easy to use Control Panel Working Height 300 - 1300mm Working Length 300 - 2500mm Workin...

Taylor JLT Clamp Rack JLT

Taylor JLT Clamp Rack Clamping cap.: 2" x 48" x 120" for entry doors; Specifications: Two (2) way pneumatic clamping. Clamp positioning adjustable; Lever operated pneumatics and 45° angle slant for...

L&L Glue Press DA 50

L&L Glue Press Model DA 50 - Excellent condition! L&L Radio Frequency Press features a 50″ X 84″ platen. The 10 KW frequency RF generator cures up to 1,000 sq. in of glue line per minute. The pres...

Uhling HP 4000 Case Clamp

Uhling HP 4000 Case Clamp Clamping Capacity 100″L x 50″H x 24″D Clamping (3) Top Dual Pod Pressure Bars and (2) Side Dual Pod Pressure Bars 30 Second Set-up / Changeover Time Heavy Duty Quality Con...

Ritter Model R525 Electronic Case Clamp:

Ritter Model R525 Electronic Case Clamp: semi automatic clamp cycle, (2) 2 HP beam drive motors, TEFC horizontal/vertical beams, magnetic controls, 3PH 220V. Very good condition!

2019 Homag Ligmatech MPH 410 Case Clamp

HOMAG LIGMATECH MPH 410 CASECLAMP (2014): ● Rapid Speed option ● Custom height stands included ● Option of 60’ of conveyor line with 2-90’s for an additional $2,500

Ritter R525 SP Case Clamp

Ritter R525 SP Case Clamp Feed Through Very good condition Specification: All electronic operation, 6,000 PSI Maximum pressure, Adjustable pressure settings Semi-automatic opening adjustment42 (len...

Taylor JLT Case Clamp

Taylor JLT Clamp Rack Clamping cap.: 2" x 48" x 120" for entry doors; Specifications: Two (2) way pneumatic clamping. Clamp positioning adjustable; Lever operated pneumatics and 45° angle slant for...

Weeke BP 80

Weeke Optimat BP 80 CNC Router - Very Good Condition! Technical Specifications: - X, Y, Z axis: 2750 mm x 900 mm x 50 mm working table - 3030 mm x 950 mm x 100 mm max panel size routing - 11 vert...

Biesse Rover Rover A 3.65 AT CNC Flat table

Biesse Rover Rover A 3.65 AT CNC Flat Table - Excellent Condition! Description: CNC, Flat table 4' x 12', 10 position tool changer, 14 position drill bank, twin Busch R305 vacuum pumps, 15 HP spi...

SCMI RD 132 NT TVNPR

SCMI Routech RD 132 NT TVN 5 Axis Manufactured 2007 $200,000 when new! Excellent Condition - Priced to Sell! Machine was priced originally at $59,500. Owner is motivated for a quick sell at $29,500...

Biesse Rover 24 XL1 CNC  Flat Table with 2 tool changers

Biesse Rover 24 XL1 CNC Flat Table with 2 tool changers – Excellent condition! GENERAL SPECIFICATIONS: *Industrial machine with heavy-duty structure * Working area axes “X”,”Y” axes: 6170 mm – 1380...

Anderson Andi Stratos/WFD

Andi Stratos/WFD CNC Router by Anderson, Description: Includes Fanuc Control ...3 Axis X Y Z...Router Spindle 15 H.P ...Nice Flat Table Nested Base Machine... single table 5′ x 10′ with an 8 positi...

Biesse Rover 24 – Pod and Rail

Biesse Rover 24 CNC – Excellent Condition! Note: Original Purchase price $149,850.00 – Current Replacement Value (Approx.): $160,000.00 GENERAL SPECIFICATIONS *Industrial machine with heavy-duty st...

HOLZ-HER COSMEC CONQUEST 515 CNC ROUTER 5′ X 10′

HOLZ-HER COSMEC CONQUEST 515 CNC ROUTER 5′ X 10′ Automatic tool changer, 15 HP motor,2 vacuum pumps, control included. Excellent condition!

Weeke Optimat BP 145 CNC Machine Center

Weeke Optimat BP 145 CNC Machine Center – Excellent Condition Specifications:

Homag Vantage 200

Homag Vantage 200 - Manufactured 2018 Like new and in excellent condition! Guaranteed! Over $250,000 new! Description: - 5x12 Nesting machine - Infeed (TLF integration with roller table) - Out fe...

Weeke Optimat BP 150

Weeke Optimat “BP-150″ CNC Machining Center Working field: X-axis 3250 mm (127.9″) Y-axis 1000 mm (39.3″) max material thickness 80 mm (3.1″) Axis stroke: X-axis 4730 mm (186.2″) Y-axis 1685 mm (66...

Weeke BP 100 CNC Router

Weeke BP 100 CNC Router Technical Specifications: Number of vertical drilling spindles 19 Vertical drilling spindle power 1.5 Kw; Number of horizontal drilling spindles 4; Horizontal drilling spind...

Holzher Cosmec CNC Router Conquest 250

Holzher Cosmec CNC Router Conquest 250 Excellent condition! Description: 10 HP Rotor Spindle motors, 4′ x 8′ table, automatic tool changer, Becker vacuum pump. 10.7 Hp main vertical router spindle,...

Cosmec Conquest 255 CNC Router

Cosmec Conquest ST 255 CNC Router 4 x 8 machines available $19,900 each Designed with a movable bridge and a fixed table, the machine allows you to process thick panels with the greatest accuracy, ...

DeVibuss WATC - 5000 with Kaeser HTRD35 Air Dryer

DeVilbiss WATC - 5000 with Kaeser HTRD35 Air Dryer -Very Good Condition! 10hp 3 phase air compressor

Norfield Magnum Door Machine

Norfield Magnum Door Machine: Reconditioned - Like New! All new air cylinders and valves and 110 v motors. Rebuilt 3-phase motors (Lock Drill, Latch Drill, Sanders, Sizer) New bearings and bushin...

KVAL 990F-3 Pre-Hanger Door Machine w/6-Shooter Hinge Applicator & Pre-Drills

KVAL 990F-3 Pre-Hanger Door Machine w/6-Shooter Hinge Applicator & Pre-Drills KVAL 700C DOOR PRE-HANGING ASSEMBLY STATION (Staplers to be provided by buyer) F.O.B. Chico, CA Reconditioned With W...

Accu-Systems HVPP CNC Dowel, Bore, Glue Inserter

Accu-Systems HVPP CNC Dowel, Bore, Glue Inserter Description: (4) Working zones, overall 78″ max. width cap.; (1) CNC controlled head assembly: (1) Vertical (this head has been removed, slide and w...

WEEKE ABD 100 Horizontal CNC Dowel Inserter

WEEKE ABD 100 is designed for small or large capacity horizontal drilling, gluing and dowel insertion. Built on a heavy-duty welded steel base. The main horizontal beams hold the carriage for the b...

Koch Sprint Baseline Dowel Inserter - Like New

KOCH DRILL AND DOWEL MACHINE - Manufactured 2019 Like New wit very few hours Excellent condition! MODEL: SPRINT BASE.LINE • STOCK LENGTH (Y) 7-7/8”- 31 ½” • STOCK LENGTH (X) ¾” – 51” BETWEEN OUT...

Accusystems H23 Dowel Inserter

Accusystems H23 Dowel Inserter Description: 9 drills, 4 clamps, 2 oscillating dowel drums, Manual drill height adjustment. Excellent condition.

Accusystems Dowel Inserter Model DD *SOLD*

Accusystems Dowel Inserter Model DD SPECIFICATIONS: DOWEL DIAMETER: 5MM THRU 10MM – 1/4″ – 3/8″, DOWEL LENGTH: 25 TO 38 MM – 1″ – 1.5″, POWER 120 VAC, AIR REQUIRED 80-100 PSI, OPERATION SPEED 60 – ...

Homag Optimat ABD 100 CNC - Price Reduce For Quick Sale

Homag Optimat ABD 100 CNC Dowel Machine – Excellent condition - Price Reduced for Quick Sale! Description: Horizontal drilling, gluing and dowel insertion: (1) Horizontal drilling aggregate with (1...

Dantherm NFB 3A

Dantherm NFB 3A with 48 filter bags, has reverse pulse, 25 HP motor, includes electricals, manufactured by Nedermak. Good condition. Please also see additional photo attached below.

Air Sentry Cyclone and Bag Houses

Air Sentry – Cyclone 30 HP blower and two bag houses.with rotary air locks.Includes stands. Very good working condition. Bags also in very good condition.

Homag SE9500 (KL75/A20) Single Sided Edgebander

Homag SE9500 One Sided Edgebander Excellent Condition! Priced To Sell! show Machine... Description: Continuous machine frame and automatic track system. Top pressure beam equipped with double comp...

SCM Olympic K203 Edgebander

SCM Olympic K203 Edgebander Recently serviced with new bearings. 2007 Excellent condition! – Teflon Coated Glue Pot, Triple Pneumatic Loaded Pressure Rollers, Heavy Duty Guillotine, Twin High Frequ...

Holz Her 1436 SEL Primus Edgebander

Homag Model SE-9500 Edgebander (with optional Auto Grover available)

Homag Model SE-9500 Edgebander (with optional Auto Grover available for an additional $8,500) Description: The Homag SE 9500 is the most versatile of the SE 9000 series. With the capacity to apply ...

Homag Ambition 2472

HOMAG AMBITION 2472-AIRTEC WITH LIGMATECH TFU-140 RETURN Outstanding Condion (2018): ● 6 Coil Magazine ● AIRTEC-ZERO JOINT UNIT - 40mm max thickness ● EVA Glue-Pre-melter ● Nesting package ● Small ...

Brandt Optimat KD56 2P

Brandt Optimat KD56 2P Description: PC-16 program control, 0.4 – 3mm (0.016″ – 1/8″) edge thickness capacity, 8mm – 40mm (5/16″ – 1-5/8″) panel thickness, Automatic coil and strip feed magazine, Pa...

Holzma Econo Optilift Model HEE38/16Charging system with rollers and control

Holzma Econ Optilift HEE 38/16Charging system with rollers and control. Description: Roller table with cutout for fork lift, 5′ x 10′ capacity, , full bunks, charging system an control, automatic i...

Caterpillar Fork Lift GP30

Solid Pneumatic Tires Simplex Mast Capacity 6000lbs Max Extended Height Mast Propane Tank 5000 Hours. Nice..

Genie Terex GTH5519

Genie Terex Model GTH5519 Forklift The Genie® GTH™-5519 compact telehandler is the perfect choice for tasks both large and small. Easy to maneuver and transport, and convenient to service, it meet...

SCMI F410 16" Jointer

SCMI F410 Jointer - Very Good Condition! The F 410 16" jointer has 6.6HP main motors, long infeed and outfeed cast iron tables, and a pivot system precisely placing the beds in the correct positio...

Northfield Model 16 HD Jointer

Gorbel

Gorbel Jib Crane 250 .lbs Capacity - Foundation-less Free Standing Crane over 10', vacuum lift included. Excellent condition!

2010 Schmaltz Ergo Jumbo 85 Vacuum Lifter with Jib Crane

Schmaltz Ergo Jumbo 85 Vacuum Lifter with Jib Crane (2010) - Excellent Condition ● 85 kg Lifting Capacity ● 14’6” Jib Crane swing ● Dust filter ● Motorcycle grip for lifting ● Packed and ready for ...

2005 SCMI Superset Moulder

SCMI Superset Class Moulder - 2005 - Excellent Condition! 6-Head Moulder, 9" working capacity with sound enclosures Includes cutter heads, feed rollers and additional tooling! 1st - Bottom 10 HP...

Weinig Profimat Super 26

Weinig Profimat Model 26 Super Moulder Description: 5 head, B-R-L-T-B; Head Sequence: Bottom 10HP, right and left by 15 HP, top 15 HP and 10 HP; Spindles: 1-1/2" with cutter head speed 6,000 RPM; F...

Weinig Gold 5 Head Moulder

Weinig Unimat Gold 5 Head Moulder – Outstanding condition! Low hours! 30 Day Return Guarantee! Specifications: Automatic tooling system, 5 Head Moulder configuration – Bottom, Right, Left, Top, and...