Holzma HPP 350 43/43Horizontal Beam Saw – Holzma Econolift also available at $22,000

$34,900.00

Out of stock

Description

Holzma HPP 350 43/43Horizontal Beam Saw  –  Also available as an optional feature is a Holzma Econolift at $22,000

Description:

Cut length 169″ (4,300 mm), 167″ (4,250 mm) pull back, 3″ (80 mm) saw blade projection, 12 HP (9 kW) main saw motor and 3 HP (2.2 kW) scoring motor; scoring saw adjustment is from the “CADMATIC 4.0″ control. Variable saw carriage travel speed from 16 – 426 FPM (5 – 130 MPM), constant return of 426 FPM (130 MPM). Electronically controlled overhead program fence with (7) gripper clamps, clamps open up to 90 mm (3.5”); rack & pinion drive on both sides, forward speed from 82 to 262 FPM (24 – 80 MPM), return speed of 262 FPM (80 MPM). • HOLZMA “Power Control with “CADMATIC 4.0” + “Windows XP” operating system; virtually unlimited cutting dimensions memory; TFT 17″ flat screen monitor, REAL-TIME moving graphics; panel grooving & numeric display. • Industrial keyboard, 1.44MB Floppy & CD ROM drives, capable of online operation via RS 232 or USB port for possible link to office PC. • Automatic “CENTRIC” side aliginer with front & rear forks holding ripped strips squarely against the right angle fence.  (1) Front air floatation tables 86″ x 25″ (2,160 mm x 650 mm), (3) front air floatation tables 69″ x 25″ (1.760 mm x 650 mm). Actual model is “HPP 350 43/43”. 460v; 3ph; 60.  Cut length 169″ (4,300 mm), 167″ (4,250 mm) pull back, 3″ (80 mm) saw blade projection, 12 HP (9 kW) main saw motor and 3 HP (2.2 kW) scoring motor; scoring saw adjustment is from the “CADMATIC 4.0″ control.  Variable saw carriage travel speed from 16 – 426 FPM (5 – 130 MPM), constant return of 426 FPM (130 MPM).  Electronically controlled overhead program fence with (7) gripper clamps, clamps open up to 90 mm (3.5”); rack & pinion drive on both sides, forward speed from 82 to 262 FPM (24 – 80 MPM), return speed of 262 FPM (80 MPM).  HOLZMA “Power Control with “CADMATIC 4.0” + “Windows XP” operating system; virtually unlimited cutting dimensions memory; TFT 17″ flat screen monitor, REAL-TIME moving graphics; panel grooving & numeric display. • Industrial keyboard, 1.44MB Floppy & CD ROM drives, capable of online operation via RS 232 or USB port for possible link to office PC.  Automatic “CENTRIC” side aliginer with front & rear forks holding ripped strips squarely against the right angle fence.  (1) Front air floatation tables 86″ x 25″ (2,160 mm x 650 mm), (3) front air floatation tables 69″ x 25″ (1.760 mm x 650 mm).  Actual model is “HPP 350 43/43”.

 

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.