Used Wood Mizer LT70

Wood Mizer LT70

$64,500 (USD)

WoodMizer LT70 Saw Description: deluxe hydraulic log handling, advanced board return, debarker, Accuset® 2 electronic head controls, diesel/electric power, 36” log diameter, 20’2” log length, and p...

Used Torit Donaldson  Cyclone RF

Torit Donaldson Cyclone RF

$95,000 (USD)

Torit Donaldson Cyclone Dust Collector - purchased at $390,000 Originally! - Collector was recently serviced, Excellent condition! Description: 100 HP full arrestor system, power pump with flush ...

Used Holzher Kundig TOPIQ 2 - 43 Wide Belt Sander Kundig TOPIQ 2 - 43

Holzher Kundig TOPIQ 2 - 43 Wide Belt Sander Kundig TOPIQ 2 - 43

$10,900 (USD)

Description: Two head wide belt sander; 43"; First head motor: 25 HP, 480 V; First head: 6-1/4” dia. 80 shore grooved rubber covered; Second head: combination head w/ 6-1/4” grooved rubber covered;...

Used Brandt Profline KDF 770

Brandt Profline KDF 770

$23,900 (USD)

Brandt Profline KDF 770 – Excellent condition! PC-20 Control System Industrial PC with USB Port Quick Melt Glue System Automatic Strip Feed Magazine Infrared Quartz Heating System at Infeed Double ...

Used Holzher Sprint 1321-2 Edgebander

Holzher Sprint 1321-2 Edgebander

$17,500 (USD)

Holzher Sprint 1321-2 Edgebander Description : With premill, bottom trim units, Profile scraper, Corner Round, Glue Scraper, Buffing, PLC Control, Thickness: Coil – 0.4 to 3 mm, Strips – 0.4 to 15 ...

Used Andi CNC Router by Anderson

Andi CNC Router by Anderson

$19,000 (USD)

Description: Includes Fanuc Control ...3 Axis X Y Z...Router Spindle 15 H.P ...Nice Flat Table Nested Base Machine... single table 5′ x 10′ with an 8 position ride along tool changer, boring block...

Used Holzma HPP81 CNC Front End Saw

Holzma HPP81 CNC Front End Saw

$17,500 (USD)

Holzma HPP81 CNC Front End Saw Description: 149″ (3,800 mm) Cutting length, 3.3″ (85 mm) cutting height, 18 HP (13.4 kW) main and 3 HP (2.2 kW) scoring motor. Variable saw carriage travel speed 0 –...

Used Selco EB80

Selco EB80

$25,000 (USD)

Selco EB80 Beam Panel Saw with Frontal Loading - Excellent Condition Late model machine with low hours General Specifications: cutting width 3200 mm, cutting length 3200 mm, Max. main blade project...

Used Brandt Optimat KDF780

Brandt Optimat KDF780

$19,500 (USD)

Brandt Optimat KDF780 – Machine in excellent condition with only 2687 hours! 208/230/460/480v; 3ph; 60 Well maintained machine Edge capacity: 0.4 – 15 mm (5/8″); Panel thickness: 5/16″ – 2-3/8″; Mi...

Used Komo VR 512 CNC Router

Komo VR 512 CNC Router

$12,500 (USD)

Komo VR 512 CNC Router Very Good condition! Specifications: - 5′ x 12′ cutting area (60″ x 144″) - moving-table design - 16 HP Colombo high-frequency spindle (max 18000 RPM) - 8-position, Head-mo...