SCMI Tech 100 Point to Point CNC Router with 2 Spindles, Aggragets, and Vacuum Pumps -PRICED TO SELL!
SCMI Tech 100 Point to Point CNC Router with 2 Spindles and Aggragets, and vacuum pumps
Description: Boring and routing CNC machining center for panel production.
Boring Units with: -(14) independent Vertical Boring; (4) independent Horizontal along X-Axis; (2) independent Horizontal along Y-Axis & (1) Grooving unit for Longitudinal grooving.
Routing units: – (2) 5.6 kW (7.5 HP) Motors @ 9,000 – 18,000 RPM; left to right rotation; MK2 chuck attachments & (2) individual suction hoods which activate when the groups are in use. – (1) Grooving unit.
Control cabinet with: “KTL 10500″ CNC 32-Bit multiprocessor, 256 KB RAM, 8″ monochrome graphics monitor, alphanumeric keypad, 3-1/2” floppy disk drive and RS-232 serial port.
Working Range Between the Stops along the X-Axis:
– With the Vertical Spindles 2600 mm
– With Horizontal Spindles Along (1)side: 2600 mm
Working Range Along the Y-Axis:
– With Vertical Spindles 860 mm