Blum

Blum Mini Press – Pneumatic Description: Pneumatic insert hinge boring machine, with 1 HP motor.

SCMI TOP 35 HORIZONTAL/VERTICAL BORING MACHINE – CONSTRUCTION LINE

SCMI TOP 35 HORIZONTAL/VERTICAL BORING MACHINE – CONSTRUCTION LINE DESCRIPTION: 35 SPINDLES BORING HORIZONTALLY & VERTICALLY, 3 HP MOTOR GEAR DRIVE SPINDLES @ 3200 RPM TWO HOLE FINDERS FOR LINE BOR...

SCM Model MB51 Multispindle Boring Machine

SCM Model MB51 Multispindle Boring Machine Description: Center distance between spindles 32mm, 6HP motor, horizontal head with 21 spindles, vertical unit with 2 swiveling and 15 spindle boring chuc...

Ritter R800 Spindle Machine

Ritter R800 Spindle Machine – very good condition

Ritter R46VH Boring Machine

Ritter R46VH Boring Machine Description:  72″ Precision Machined Backfence, Six Fence Stops and Four Table Stops,  Easy Access Control Panel,  (2) 23 Spindle Drilling Heads, One Vertical, One Horiz...

Ritter R850

Ritter Model R850 Horiziotal Boring Machine Description: 13 Spindle Horizontal Boring Machine, 2HP, 230V, 3PH. Very good condition!

Laguna Model BM23L Line Boring Machine

Laguna Model BM23L Line Boring Machine Description: 23 spindle line boring machine. 32 mm. Drill both rows of holes without having to flip the piece around! It weighs in at over 600 lbs and it is f...

Conquest Model 46-2 Line Boring Machine

Conquest Model 46-2 Line Boring Machine 2-46 DUAL 23 SPINDLE LINE BORING MACHINE WITH 4 FLIP STOPS and 132 inch FENCE CAPACITY  230 Volt 3 Phase or  460 Volt,  3 Phase having Pneumatic Foot Pedal O...

Conquest Mini 13 Spindle Line Boring Machine

Conquest Mini 13 Spindle Line Boring Machine

Blum Mini Press

Blum Mini Press pneumatic door hinge and boring machine. Very good working condition.

Ayen SKB50 Horizontal/Vertical Boring Machine

Ayen SKB50 Horizonital/Vertical Boring Machne. This is a construction line boring machine that includes everything to be up and running from the box: 32mm boring machine, 50 spindles across, with f...

Ritter Model R525 Electronic Case Clamp:

Ritter Model R525 Electronic Case Clamp: semi automatic clamp cycle, (2) 2 HP beam drive motors, TEFC horizontal/vertical beams, magnetic controls, 3PH 220V. Very good condition!

Ligmatech Optimat MPH 10 Case Clamp

Ligmatech Optimat MPH 10 Case Clamp , Very good condition. Capacity: Opening size is 4 ft x 8 ft H, Approx. Shipping Weight & Dimensions: 9’ 6” high, 3’ wide and 13’ long about 3000 lbs.

Biesse Rover 24 – Pod and Rail

Biesse Rover 24 CNC  – Excellent Condition! Note:  Original Purchase price $149,850.00 –  Current Replacement Value (Approx.): $160,000.00 GENERAL SPECIFICATIONS *Industrial machine with heavy-duty...

Biesse 2014 Rover AS 1332 UTS CNC Pod and Rail Machine

Biesse 2014 Rover AS 1332 UTS CNC Pod and Rail Machine - Excellent working condition! MSRP replacement new $125,000! Description: 5 x 10 rail and pod machine center with a 12 position revolving ...

Holzher

Holzher Cosmec CNC Router Conquest 250  Excellent condition! Description: 10 HP Rotor Spindle motors, 4′ x 8′ table, automatic tool changer, Becker vacuum pump. 10.7 Hp main vertical router spindle...

Weeke Optimat BP 150

Weeke Optimat “BP-150″ CNC Machining Center Working field: X-axis 3250 mm (127.9″) Y-axis 1000 mm (39.3″) max material thickness 80 mm (3.1″) Axis stroke: X-axis 4730 mm (186.2″) Y-axis 1685 mm (66...

SCMI Routech Record 220

2 - 5' x 10' zones, 15 hp spindle motor, tool changer, drilling units, has a vacuum pump, fanuc CNC control, machine: stationary extruded aluminum table is machined with a square grid pattern for f...

SCMI Tech 100 Point to Point CNC Router with 2 Spindles, Aggragets, and Vacuum Pumps

SCMI Tech 100 Poin to Point CNC Router with 2 Spindles and Aggragets, and vacuum pumps Description: Boring and routing CNC machining center for panel production. Boring Units with: -(14) independen...

Weeke BP 100 CNC Router

Weeke BP 100 CNC Router Technical Specifications: Number of vertical drilling spindles 19 Vertical drilling spindle power 1.5 Kw Number of horizontal drilling spindles 4 Horizontal drilling spindle...

Andi CNC Router by Anderson

Andi CNC Router by Anderson, single table 5′ x 10′ with an 8 position ride along tool changer, a boring block, a multi-tap transformer,3 PH, and a Becker vacuum pump. Excellent working condition.

HOLZ-HER COSMEC CONQUEST 510 CNC ROUTER 5′ X 10′

Biesse A3.65 Flat Table

Biesse Rover A3.65 Flat Table CNC Machining Center – includes vacuum pump Excellent condition! Description: 4′ x 20′ flat table with a 3.65 FT working area, 460v, 37amps, (16) pop-up locating pins...

Multicam MG205 CNC Router

Multicam MG205 CNC Router Description: 60" x 145" work area, 15 HP spindle, 20,000 rpm, 8-position tool changer, dual zone vacuum table, 2003. Excellent condition.

Weeke Model BP140 CNC Router

Weeke Model BP140 CNC Router. Specifications: x-axis 167″, Y-axis 51″, z-axis 10.2″, 8-section ATC tool changer, 12HP  router, boring unit with 21 independent vertical spindles, 6 horizontal spindl...

Norfield Magnum Door Machine

Norfield Magnum Door Machine – Upgraded to handle 9'2" Doors, Refurbished Norfield Magnum Refurbished. Door Sizing/Beveling, Lock & Latch Drilling, Hinge Butt Routing in the Door & Jamb, Face pl...

Norfield Magnum Door Machine – Rebuilt and Warrantied, Upgraded to handle 10′ Doors

Norfield Magnum Door Machine – Upgraded to handle 10′ Doors Door Sizing/Beveling, Lock & Latch Drilling, Hinge Butt Routing in the Door & Jamb, Face plate Routing up to 1 1/8″ x 2 3/4″, Air Predril...

Ruvo Model 500 Door Machine

Ruvo 500 Pre Hung Door Machining station. Excellent condition. Multiple 208-230/460, 3PH motors This machine can machine door or door and hinge jamb. The cylinder lock/deadbolt and latch drilling i...

Northtech NT-DTM-3XL Dovetail Machine

Hoffman MU2-P Dovetail Routing Machine

Hoffman MU2-P Dovetail Routing Machine The MU2-P pneumatically controlled dovetail routing machine to rout a single dovetail keyway with each machining cycle. Heavy cast-aluminum construction with ...

Omal TOP HBD 1390 Dowel and Glue Insertion Machine

Omal TOP HBD 1390 Dowel and Glue Insertion Machine Description: The Omal 1390  is a numerically controlled machine to drill, glue and insert dowels on horizontal pieces with 2 loading zones with a ...

Homag Optimat ABD 100 CNC

Homag Optimat ABD 100 CNC – Excellent  condition Description: Horizontal drilling, gluing and dowel insertion: (1) Horizontal drilling aggregate with (1) individual spindle; (1) glue & dowel inject...

Accusystems H23 Dowel Inserter

Accusystems H23 Dowel Inserter Description: 9 drills, 4 clamps, 2 oscillating dowel drums, Manual drill height adjustment. Excellent condition.

Koch Sprint Model PTP Dowel Inserter

Koch Sprint Model PTP Dowel Inserter Automatic step by step dowel insertion, boring and glue injection into panel components, drawer parts and chair pieces random spacing, monitor, Standard control...

Gannomat Selecta 252N Dowel Inserter

Gannomat Selecta 252N Dowel Inserter – Excellent working condition!

Gannomat Index 125 Boring Machine

Gannomat Model Index 125 CNC Controlled Point-to-Point Drilling, Gluing & Dowel Insertion Machine; Description: equipped with a single spindle top boring unit for face drilling; having a working le...

Accusystems Dowel Inserter Model DD

Accusystems Dowel Inserter Model DD SPECIFICATIONS: DOWEL DIAMETER: 5MM THRU 10MM – 1/4″ – 3/8″, DOWEL LENGTH: 25 TO 38 MM – 1″ – 1.5″, POWER 120 VAC, AIR REQUIRED 80-100 PSI, OPERATION SPEED 60 – ...

Murphy Rogers MRM - 92D

Murphy Rogers MRM - 92D Dust Collector Description: 7.5 HP motor, stand, shaker mag. starter, 30 hours, 2600 CFM, 30 bags. Very good condition. Hours: 30 bag hours

Torit Model 24 Dust Collector

Torit Model 24 Dust Collector – 7.5 HP motor cyclonic with dust house, includes the drum, and 4 bag after filter.. Very good condition. •Cyclone separator built for top-level efficiency, Efficiency...

Air Sentry Cyclone and Bag Houses

Air Sentry – Cyclone 30 HP blower and two bag houses.with rotary air locks.Includes stands. Very good working condition. Bags also in very good condition.

Brandt Optimat KDF780

Brandt Optimat KDF780 – Machine in excellent condition with only 2687 hours! 208/230/460/480v; 3ph; 60 Well maintained machine Edge capacity: 0.4 – 15 mm (5/8″); Panel thickness: 5/16″ – 2-3/8″; Mi...

2016 Biesse 2016 Stream A 6.0 CNC Edgebander Stream A 6.0

Biesse 2016 Stream A 6.0 CNC - Excellent working condition! This machine is 17 months old and is like new condition. It was tuned up with all new tooling. This machine today has a MSRP of $2...

Homag Model SE-9500 Edgebander (with optional Auto Grover available)

Homag Model SE-9500 Edgebander (with optional Auto Grover available for an additional $8,500) Description:  The Homag SE 9500 is the most versatile of the SE 9000 series.  With the capacity to appl...

SCMI S220/44 Edgebander

SCMI S220/44 Edgebander – Excellent Condition Description: Workable panel thickness 10 – 60 mm -Solid wood strips up to 20 mm -Thickness coils: edge up to 3 mm -Feed speed up to 18 mt/min -Pre mill...

Brandt KDF 980

Brandt Profiline KDF 980 Edgebander - Excellent condition! With premill and corner rounding. Edge band thickness 0.4 - 20 mm (0.016" - 25/32"), Edgeband height 12 - 65 mm (1/2" - 2 9/16"), Panel l...

Brandt Optimat KD79 Edgebander

Brandt Optimat KD79 Edgebander 2002, very good working condition Description:

Holzher Weinig  Streamer Model 1057

Holzher Weinig  Streamer Model 1057 – Corner rounding, top and bottom flush trim, buffing, hot melt system.  Excellent condition! Overall Length 4630mm Weight 1250kg Feed Speed 10 m/min Min Length ...

SCMI S220/44 Edgebander

SCMI S220/44 Edgebander Description: Premill and corner rounding.  Workable panel thickness 10 – 60 mm -Solid wood strips up to 20 mm -Thickness coils: edge up to 3 mm -Feed speed up to 18 mt/min -...

SCMI Olympic K208 Edgebander

SCMI Olympic K208 Edgebander, Manufactured 2003  – Very good condition! Specifications: PLC control for up to 50 stored programs with Diagnostic, production reports and machining reports 5” Display...

SCMI Olympic SE215 Edge Bander

SCMI Olympic SE215 Edge Bander Description: Panel height mm 10/60, Max edge thickness mm 15, Max edges in roll thickness mm 3, Gluing unit Mod. VC600-2 composed by glue pot rapid heating, glue spre...