Brandt Optimat KDF780

$39,900.00

Description

Brandt Optimat KDF780 – Machine in excellent condition with only 2687 hours!

208/230/460/480v; 3ph; 60
Well maintained machine

Edge capacity: 0.4 – 15 mm (5/8″);
Panel thickness: 5/16″ – 2-3/8″;
Min. panel length 160 mm (6-3/8″) and min. width 65 mm (2-3/8″)
line control (NO limit switches) for workstation function
Adjustments on major stations are fully automated
Pressure beam height adjustment for all work stations via digital height indicator
PC-20 Program Control; with 12″ Industrial PC screen 256 MB RAM
1 Gb Flash card
with USB Port & remote diagnostic link
Signal infeed light to insure proper spacing between panels

Two (2) Motor Pre-mill unit;
Two (2) 3 HP motors (12,000 RPM) with straight and chamfer capability
Program controlled indexing from straight to bevel
Rotation for climb cutting & conventional machining
Quick heat-up glue system,(approx. 10 minutes)
w/hopper feeder & w/glue tank for maintenance & quick glue color change
Glue temperature indicator for both the glue pot and glue roller with
LED thermostat and automatic temperature reduction if the
machine is idle for 15 minutes or more
The glue applicator roller is also reversable and retractable from the fence line

Automatic magazine for strip & coil (Large coil table 800 mm diameter to accommodat
large coils of 3 mm PVC) stock, 3 mm PVC guillotine
(1) drive plus (3) secondary rollers “pneumatically controlled” pressure sections
Variable Feed speed 36 – 65 FPM (3 HP feed motor)
Two (2) End trim (1/2 HP – 12,000 RPM motors), chamfers 0° – 15° via programmable controller
Top & bottom flush/radius trim, bevels 0° – 15° (3/4 HP – 12,000 RPM motor)
with insert knives for 3 mm PVC radius.
Two (2) Motor Contour trimming station (1/2 HP – 12,000 RPM each motor)
for corner rounding for front & trailing corners on the fly
Top & bottom scraping for 3 mm PVC radius, pneumatically
controlled indexing system; Top & bottom flat/glue scrape
Top & bottom oscillating buffing (0.25 HP – 2,800 motors)
Corner rounding station operates at 16 MPM (52 FPM)
Complete with: Operator control panel w/PLC
(Programmable Logic Control) keypad & LED readouts
End trim, flush trim & fine trim stations have HF motors w/electronic brakes

Note: Return conveyor available.

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.